System connectors and interfaces
Profile connectors and interfaces – baseplates, angle brackets, beam clamps, saddles and system nuts and bolts for connecting profiles and media in modular supports
224 Products
Filter
- Description
- Galvanised channel connector used as a longitudinal extender for MQ strut channels
- Material composition
- S235JR - DIN EN 10025
- Surface finish
- Indoor Coated - Electro galvanised
- Material thickness
- 4 mm
- Description
- Galvanised pipe clamp saddle for connecting threaded components to MQ/HS channels
- Product class
- Premium
- Material composition
- DD11 MOD - HN 547, S235JR - DIN EN 10025
- Surface finish
- Indoor Coated - Electro galvanised
- Description
- Hot-dip galvanised (HDG) wing nut for connecting modular support system components
- Material composition
- Wings: plastic PA, Nut: C4C - DIN EN 10263
- Surface finish
- Outdoor Coated - HDG
- Environmental conditions
- Outdoor, low to moderate pollution (C3 / C4 - low)
- Description
- Hot-dip galvanised (HDG) 90-degree angle for connecting multiple MQ strut channels
- Material composition
- S235JR - DIN EN 10025
- Surface finish
- Outdoor Coated - HDG
- Material thickness
- 4 mm
- Description
- Hot-dip galvanised (HDG) 45- or 135-degree angle for connecting multiple MQ strut channels
- Material composition
- S235JR - DIN EN 10025
- Surface finish
- Outdoor Coated - HDG
- Material thickness
- 4 mm
- Description
- Hot-dip galvanised (HDG) channel connector for three-dimensional structures
- Material composition
- S235JR - DIN EN 10025
- Surface finish
- Outdoor Coated - HDG
- Material thickness
- 4 mm
- Description
- Hot-dip galvanised channel connector used as a longitudinal extender for MQ strut channels
- Material composition
- S235JR - DIN EN 10025
- Surface finish
- Outdoor Coated - HDG
- Material thickness
- 4 mm
- Description
- Hot-dip galvanised (HDG) flat plate connector used for joining channels at right angles
- Material composition
- S235JR - DIN EN 10025
- Surface finish
- Outdoor Coated - HDG
- Material thickness
- 4 mm
- Description
- Hot-dip galvanised (HDG) beam clamp for connecting MQ strut channels directly to steel beams
- Material composition
- Claw plate: S235JR - DIN EN 10025, U-bolt: S235JRG2 - DIN EN 10025
- Surface finish
- Outdoor Coated - HDG
- Environmental conditions
- Outdoor, low to moderate pollution (C3 / C4 - low)
- Description
- Hot-dip galvanised (HDG) pipe clamp saddle for connecting threaded components to MQ strut channels
- Material composition
- Nut: EN-GJMW-450-7 - DIN EN 1562, Plate: S235JR - DIN EN 10025, Plastic: PB
- Surface finish
- Outdoor Coated - HDG
- Environmental conditions
- Outdoor, low to moderate pollution (C3 / C4 - low)
- Description
- Hot-dip galvanised (HDG) channel foot for fastening channels to concrete
- Material composition
- S235JR - DIN EN 10025
- Surface finish
- Outdoor Coated - HDG
- Environmental conditions
- Outdoor, low to moderate pollution (C3 / C4 - low)
- Description
- Protective separation fleece for use between MV-LDP load distribution plates and roof
- Material composition
- Felt
- Surface finish
- n/a
- Description
- Hot-dip galvanised (HDG plus) wing nut for connecting modular support system components
- Material composition
- Wings: plastic PA, Nut: QStE 380 TM, SEW 92
- Surface finish
- Outdoor Coated - HDG Plus
- Environmental conditions
- Outdoor, low to moderate pollution (C3 / C4 - low)
- Description
- Robust load distribution plate with adjustable angle for installing air conditioning units, walkways, ventilation ducts, pipework or cable trays on flat roofs
- Material composition
- Plate: die cast aluminium, Connector: S235JR - DIN EN 10025
- Surface finish
- Outdoor Coated - HDG
- Environmental conditions
- Outdoor, low to moderate pollution (C3 / C4 - low)
- Description
- Hot-dip galvanised (HDG plus) channel connector for joining any elements with a butterfly opening
- Product class
- Ultimate
- Material composition
- Plate: S380MC, Nut: S355MC - DIN EN 10149-2, Bolt: grade 8.8 - DIN EN ISO 898
- Surface finish
- Outdoor Coated - HDG Plus
- Description
- Stainless steel (A4) 90-degree angle for connecting multiple MQ strut channels
- Material composition
- Stainless steel, 1.4404 (A4) – EN 10088, AISI 316L
- Surface finish
- Outdoor Plus - Stainless Steel
- Material thickness
- 4 mm
- Description
- Stainless steel (A4) channel connector used as a longitudinal extender for MQ strut channels
- Material composition
- Stainless steel, 1.4404 (A4) – EN 10088, AISI 316L
- Surface finish
- Outdoor Plus - Stainless Steel
- Material thickness
- 4 mm
- Description
- Hot-dip galvanised (HDG) connector for fastening MI girders perpendicularly to one another
- Material composition
- Connector: DD11 MOD - HN 547, S235JR - DIN EN 10025; toothed plate: EN-GJMW-400-5 - DIN EN 1562, EN-GJMW-450-7 - DIN EN 1562; bolt: 8.8 grade steel; nut: 8 grade steel
- Surface finish
- HDG: connector 55 µm - DIN EN ISO 1461; toothed plate, bolt, nut 45 µm - DIN EN ISO 1461
- Environmental conditions
- Outdoor, low to moderate pollution (C3 / C4 - low)
- Description
- Hot-dip galvanised (HDG) single beam clamp for connecting MI steel baseplates to steel beams
- Surface finish
- HDG: Clamp 55 µm - DIN EN ISO 1461; U-bolt, Nut 45 µm - DIN EN ISO 1461
- Environmental conditions
- Outdoor, low to moderate pollution (C3 / C4 - low)
- Tightening torque
- 206 Nm
- Description
- Hot-dip galvanised (HDG) baseplate for fastening MI-90 girders to concrete using two anchors
- Material composition
- Connector: DD11 MOD - HN 555-4, S235JR - DIN EN 10025-2; Bolt: Steel grade 8.8; Nut: Steel grade 8
- Surface finish
- HDG: connector 55 µm - DIN EN ISO 1461; bolt, nut 45 µm - DIN EN ISO 1461
- Environmental conditions
- Outdoor, low to moderate pollution (C3 / C4 - low)
- Description
- Hot-dip galvanised (HDG) double beam clamp for connecting MI girders to steel beams for heavy-duty applications
- Material composition
- Clamp: EN-GJMB-350-10 - DIN EN 1562, EN-GJMW-400-5 - DIN EN 1562, EN-GJMW-450-6 - DIN EN 1562; U-bolt: Steel grade 8.8; Nut: Steel grade 8
- Surface finish
- HDG: Clamp 55 µm - DIN EN ISO 1461; U-bolt, Nut 45 µm - DIN EN ISO 1461
- Environmental conditions
- Outdoor, low to moderate pollution (C3 / C4 - low)
- Description
- Hot-dip galvanised (HDG) single beam clamp for connecting MIQ steel baseplates to steel beams
- Material composition
- Clamp: EN-GJMB-350-10 - DIN EN 1562, EN-GJMW-400-5 - DIN EN 1562, EN-GJMW-450-6 - DIN EN 1562; bolt: 8.8 grade steel; nut: 8 grade steel
- Surface finish
- HDG: Clamp 55 µm - DIN EN ISO 1461; U-bolt, Nut 45 µm - DIN EN ISO 1461
- Environmental conditions
- Outdoor, low to moderate pollution (C3 / C4 - low)
- Description
- Hot-dip galvanised (HDG) connector used to connect MI girders longitudinally for long spans in heavy-duty applications
- Surface finish
- HDG: connector 55 µm - DIN EN ISO 1461; bolt, nut 45 µm - DIN EN ISO 1461
- Environmental conditions
- Outdoor, low to moderate pollution (C3 / C4 - low)
- Tightening torque
- 84 Nm
- Description
- Hot-dip galvanised (HDG) multi-angle connector used with MIC-MAH connectors for fastening MI girders to one another at an angle
- Surface finish
- HDG: connector 55 µm - DIN EN ISO 1461; toothed plate, bolt, nut 45 µm - DIN EN ISO 1461
- Environmental conditions
- Outdoor, low to moderate pollution (C3 / C4 - low)
- Tightening torque
- 84 Nm
- Description
- Galvanised decking hanger for fastening threaded rods to trapezoidal metal sheets
- Base material type
- Trapezoidal sheet, Concrete
- Material composition
- DD11 - DIN EN 10111
- Surface finish
- Indoor Coated - Electro galvanised
- Description
- Beam connectors for attaching MP-PS pipe shoes to steel beams
- Fire resistance (yes/no)
- No
- Temperature resistance
- -20 - 300 °C
- Material composition
- Beam Clamps (Clamping Claw + Saddle): Cast Iron per DIN EN1562, Baseplate: S280GD per EN10346, Rectangular washer: S235JR – Yield280 per HN 707, Bolts: F Class 8.8 per ISO 898-1, Nuts: Grade 8 per ISO 898-2, Retaining Washer: C60E per EN10132-3
- Description
- Galvanized perforated bands used in various applications
- Base material type
- Concrete
- Material composition
- DX51D+Z275-N-A - DIN EN 10346
- Surface finish
- Indoor Coated - Electro galvanised
- Description
- Galvanised medium-duty base plate to fasten metric threaded rods with two anchor points
- Material composition
- DD11 - DIN EN 10111
- Surface finish
- Indoor Coated - Electro galvanised
- Environmental conditions
- Dry indoor conditions (C1) Indoor with temporary condensation (C2)
- Description
- Heavy-duty adjustable baseplate for connecting an MT girder horizontally between two parallel walls
- Material composition
- Q355 or better steel
- Surface finish
- Indoor Coated - Electro galvanised
- Material thickness
- Base 8 mm
- Description
- Galvanised beam clamp for fastening threaded rods to steel girders without internal thread
- Base material type
- Steel
- Material composition
- EN-GJMB – EN 1562
- Surface finish
- Indoor Coated - Electro galvanised
- Description
- Galvanised retaining strap for fastening MAB beam clamps more securely
- Base material type
- Steel
- Material composition
- Steel
- Surface finish
- Indoor Coated - Electro galvanised
- Description
- MIQM Wing nut, connecting element for MIQ profiles
- Material composition
- Nut: C4C - DIN EN 10263, Plastic: PA 6.6
- Surface finish
- Outdoor Coated - HDG
- Environmental conditions
- Outdoor, low to moderate pollution (C3 / C4 - low)
- Description
- Premium hot-dip galvanised (HDG) baseplate for light-duty fixed point applications (metric)
- Material composition
- S235JR - DIN EN 10025
- Surface finish
- Outdoor Coated - HDG
- Environmental conditions
- Outdoor, low to moderate pollution (C3 / C4 - low)
- Description
- Galvanised light-duty base plate to fasten metric threaded rods with two anchor points
- Material composition
- DD11 - DIN EN 10111
- Surface finish
- Indoor Coated - Electro galvanised
- Environmental conditions
- Dry indoor conditions (C1) Indoor with temporary condensation (C2)
- Description
- Channel end cap for covering the ends of Hilti MM strut channels
- Material composition
- Polypropylene (PP)
- Description
- Channel end cap for covering the ends of Hilti MQ strut channels
- Material composition
- Plastic component: polypropylene
- Material thickness
- 4 mm
- Description
- Channel end cap for MT-20 strut channels
- Material composition
- PPB-M02
- Surface finish
- n/a
- Description
- Channel end cap for MT-30 strut channels
- Material composition
- PPB-M02
- Surface finish
- n/a
- Description
- Channel end cap for MT-40 and MT-50 strut channels
- Material composition
- PPB-M02
- Surface finish
- n/a
- Description
- Channel end cap for MT-60 strut channels
- Material composition
- PPB-M02
- Surface finish
- n/a
- Description
- Channel end cap for MT-70 girders
- Material composition
- PPB-M02
- Surface finish
- n/a
- Description
- Channel end cap for MT-80 girders
- Material composition
- PPB-M02
- Surface finish
- n/a
- Description
- Channel end cap for MT-90 girders
- Material composition
- PPB-M02
- Surface finish
- n/a
- Description
- Channel end cap for MT-100 girders
- Material composition
- PPB-M02
- Surface finish
- n/a