System connectors and interfaces
Profile connectors and interfaces – baseplates, angle brackets, beam clamps, saddles and system nuts and bolts for connecting profiles and media in modular supports
294 Products
Filter
- Description
- Stainless steel (A4) channel connector for joining any elements with a butterfly opening
- Tightening torque
- 40 Nm
- Material composition
- Screw: A4-70 - DIN ISO 3506-1, Nut: 1.4581 (A4) - DIN EN 10283, Plate: 1.4404 (A4) – EN 10088, AISI 316L
- Surface finish
- Outdoor Plus - Stainless Steel
- Description
- Stainless steel wing nut for connecting modular support system components
- Material composition
- Nut: 1.4581 (A4) - DIN EN 10283, Wings: plastic PA
- Surface finish
- Outdoor Plus - Stainless Steel
- Environmental conditions
- Outdoor high pollution (C4 – high / C5)
- Description
- Stainless steel (A4) 90-degree angle for connecting multiple MQ strut channels
- Material composition
- Stainless steel, 1.4404 (A4) – EN 10088, AISI 316L
- Surface finish
- Outdoor Plus - Stainless Steel
- Material thickness
- 4 mm
- Description
- Stainless steel (A4) 90-degree heavy angle for connecting multiple MQ strut channels in medium/heavy-duty applications
- Material composition
- Stainless steel, 1.4404 (A4) – EN 10088, AISI 316L
- Surface finish
- Outdoor Plus - Stainless Steel
- Environmental conditions
- Outdoor high pollution (C4 – high / C5)
- Description
- Stainless steel (A4) channel connector for two-dimensional structures
- Material composition
- Stainless steel, 1.4404 (A4) – EN 10088, AISI 316L
- Surface finish
- Outdoor Plus - Stainless Steel
- Material thickness
- 4 mm
- Description
- Stainless steel pipe clamp saddle for connecting threaded components to MQ strut channels
- Material composition
- Nut: 1.4581 (A4) - DIN EN 10283, Plate: 1.4404 (A4) – EN 10088, AISI 316L, Plastic: PB
- Surface finish
- Outdoor Plus - Stainless Steel
- Environmental conditions
- Outdoor high pollution (C4 – high / C5)
- Description
- Stainless steel (A4) channel connector used as a longitudinal extender for MQ strut channels
- Material composition
- Stainless steel, 1.4404 (A4) – EN 10088, AISI 316L
- Surface finish
- Outdoor Plus - Stainless Steel
- Material thickness
- 4 mm
- Description
- Stainless steel (A4) channel foot for fastening channels to various base materials
- Material composition
- Stainless steel, 1.4404 (A4) – EN 10088, AISI 316L
- Surface finish
- Outdoor Plus - Stainless Steel
- Environmental conditions
- Outdoor high pollution (C4 – high / C5)
- Description
- Stainless steel clamp for fastening one MQ strut channel to another
- Material composition
- Stainless steel, 1.4404 (A4) – EN 10088, AISI 316L
- Surface finish
- Outdoor Plus - Stainless Steel
- Material thickness
- 4 mm
- Description
- Stainless steel elements for assembling 3D structures on site
- Material composition
- Stainless steel, 1.4404 (A4) – EN 10088, AISI 316L
- Surface finish
- Outdoor Plus - Stainless Steel
- Environmental conditions
- Outdoor high pollution (C4 – high / C5)
- Description
- Stainless steel angle brace for brackets
- Material thickness
- 3 mm
- Material composition
- Stainless steel, 1.4404 (A4) – EN 10088, AISI 316L
- Surface finish
- Outdoor Plus - Stainless Steel
- Description
- Stainless steel (A4) beam clamp for connecting MQ strut channels directly to steel beams
- Material composition
- Stainless steel, 1.4404 (A4) – EN 10088, AISI 316L, Screw: A4-70- DIN EN ISO 3506-1
- Surface finish
- Outdoor Plus - Stainless Steel
- Environmental conditions
- Outdoor high pollution (C4 – high / C5)
- Description
- Hot-dip galvanised (HDG) connector for fastening U-bolts to MI girders with greater adjustability
- Surface finish
- HDG: connector, square washer 55 µm - DIN EN ISO 1461; washer, bolt, nut 45 µm - DIN EN ISO 1461
- Environmental conditions
- Outdoor, low to moderate pollution (C3 / C4 - low)
- Description
- Hot-dip galvanised (HDG) connector for fastening U-bolts to MI girders
- Surface finish
- HDG: connector, square washer 55 µm - DIN EN ISO 1461; bolt, nut 45 µm - DIN EN ISO 1461
- Environmental conditions
- Outdoor, low to moderate pollution (C3 / C4 - low)
- Description
- Hot-dip galvanised (HDG) connector for fastening MI girders perpendicularly to one another
- Material composition
- Connector: DD11 MOD - HN 547, S235JR - DIN EN 10025; toothed plate: EN-GJMW-400-5 - DIN EN 1562, EN-GJMW-450-7 - DIN EN 1562; bolt: 8.8 grade steel; nut: 8 grade steel
- Surface finish
- HDG: connector 55 µm - DIN EN ISO 1461; toothed plate, bolt, nut 45 µm - DIN EN ISO 1461
- Environmental conditions
- Outdoor, low to moderate pollution (C3 / C4 - low)
- Description
- Hot-dip galvanised (HDG) baseplate for fastening MI-90 girders to steel for heavy-duty applications
- Material composition
- Connector: DD11 MOD - HN 547, S235JR - DIN EN 10025; bolt: 8.8 grade steel; nut: 8 grade steel
- Surface finish
- HDG: Connector min 55 µm - DIN EN ISO 1461; Bolt, Nut 45 µm - DIN EN ISO 1461
- Environmental conditions
- Outdoor, low to moderate pollution (C3 / C4 - low)
- Description
- Hot-dip galvanised (HDG) multi-angle connector for fastening MI girders to steel beams at an angle
- Material composition
- Connector: DD11 MOD - HN 547, S235JR - DIN EN 10025; bolt: 8.8 grade steel; nut: 8 grade steel
- Surface finish
- HDG: Connector min 55 µm - DIN EN ISO 1461; Bolt, Nut 45 µm - DIN EN ISO 1461
- Environmental conditions
- Outdoor, low to moderate pollution (C3 / C4 - low)
- Description
- Hot-dip galvanised (HDG) baseplate for fastening MI-90 girders to concrete for heavy-duty applications
- Material composition
- Connector: DD11 MOD - HN 547, S235JR - DIN EN 10025; bolt: 8.8 grade steel; nut: 8 grade steel
- Surface finish
- HDG: Connector min 55 µm - DIN EN ISO 1461; Bolt, Nut 45 µm - DIN EN ISO 1461
- Environmental conditions
- Outdoor, low to moderate pollution (C3 / C4 - low)
- Description
- Hot-dip galvanised (HDG) baseplate for fastening MI girders to steel
- Material composition
- DD11 MOD - HN 547, S235JR - DIN EN 10025
- Surface finish
- HDG: min 55 µm - DIN EN ISO 1461
- Environmental conditions
- Outdoor, low to moderate pollution (C3 / C4 - low)
- Description
- Hot-dip galvanised (HDG) baseplate for fastening MI-120 girders to steel for heavy-duty applications
- Material composition
- Connector: DD11 MOD - HN 547, S235JR - DIN EN 10025; bolt: 8.8 grade steel; nut: 8 grade steel
- Surface finish
- HDG: Connector min 55 µm - DIN EN ISO 1461; Bolt, Nut 45 µm - DIN EN ISO 1461
- Environmental conditions
- Outdoor, low to moderate pollution (C3 / C4 - low)
- Description
- hot-dip galvanised (HDG) connector for fastening girders directly to concrete at angles between 0 and 180 degrees
- Material composition
- Connector: DD11 MOD - HN 547, S235JR - DIN EN 10025; bolt: 8.8 grade steel; nut: 8 grade steel
- Surface finish
- HDG: Connector min 55 µm - DIN EN ISO 1461; Bolt, Nut 45 µm - DIN EN ISO 1461
- Environmental conditions
- Outdoor, low to moderate pollution (C3 / C4 - low)
- Description
- Ultimate hot-dip galvanised (HDG) connectors offering highest versatility within the MI modular system
- Material composition
- Connector: DD11 MOD - HN 547, S235JR - DIN EN 10025; backing plate, toothed plate: EN-GJMW-400-5 - DIN EN 1562, EN-GJMW-450-7 - DIN EN 1562; bolt: 8.8 grade steel; nut: 8 grade steel
- Surface finish
- HDG: Connector min 55 µm - DIN EN ISO 1461; Backing plate, Tooth plate, Bolt, Nut 45 µm - DIN EN ISO 1461
- Environmental conditions
- Outdoor, low to moderate pollution (C3 / C4 - low)
- Description
- Hot-dip galvanised (HDG) baseplate for fastening MI girders to concrete
- Material composition
- DD11 MOD - HN 547, S235JR - DIN EN 10025
- Environmental conditions
- Outdoor, low to moderate pollution (C3 / C4 - low)
- Description
- Hot-dip galvanised (HDG) single beam clamp for connecting MI steel baseplates to steel beams
- Surface finish
- HDG: Clamp 55 µm - DIN EN ISO 1461; U-bolt, Nut 45 µm - DIN EN ISO 1461
- Environmental conditions
- Outdoor, low to moderate pollution (C3 / C4 - low)
- Tightening torque
- 206 Nm
- Description
- Connector for attaching modular girders to structural steel beams
- Material composition
- Connector: DD11 MOD - HN 547, S235JR - DIN EN 10025; bolt: 8.8 grade steel; nut: 8 grade steel
- Surface finish
- HDG: connector 55 µm - DIN EN ISO 1461; bolt, nut 45 µm - DIN EN ISO 1461
- Environmental conditions
- Outdoor, low to moderate pollution (C3 / C4 - low)
- Description
- Hot-dip galvanised (HDG) baseplate for fastening MI-90 girders to concrete using two anchors
- Material composition
- Connector: DD11 MOD - HN 555-4, S235JR - DIN EN 10025-2; Bolt: Steel grade 8.8; Nut: Steel grade 8
- Surface finish
- HDG: connector 55 µm - DIN EN ISO 1461; bolt, nut 45 µm - DIN EN ISO 1461
- Environmental conditions
- Outdoor, low to moderate pollution (C3 / C4 - low)
- Description
- hot-dip galvanised (HDG) connector fixed to the MI girder to accommodate pipe expansion in heavy-duty applications
- Material composition
- Body: S235JRG-2 - DIN EN 10025; roller: E295 (St50); axle: stainless steel 1.4541; bearing: PTFE
- Surface finish
- Hot-dip galvanized
- Environmental conditions
- Outdoor, low to moderate pollution (C3 / C4 - low)
- Description
- Hot-dip galvanised (HDG) connector for fastening pipe shoes to MI girders for heavy-duty applications with expansion
- Material composition
- U-bolt: Steel grade 8.8; Plate: DD11 MOD - HN 547, S235JR - DIN EN 10025; Nut: Steel grade 8
- Surface finish
- HDG: U-bolt, nut 45 µm - DIN EN ISO 1461; plate: 55 µm - DIN EN ISO 1461
- Environmental conditions
- Outdoor, low to moderate pollution (C3 / C4 - low)
- Description
- Hot-dip galvanised (HDG) double beam clamp for connecting MI girders to steel beams for heavy-duty applications
- Material composition
- Clamp: EN-GJMB-350-10 - DIN EN 1562, EN-GJMW-400-5 - DIN EN 1562, EN-GJMW-450-6 - DIN EN 1562; U-bolt: Steel grade 8.8; Nut: Steel grade 8
- Surface finish
- HDG: Clamp 55 µm - DIN EN ISO 1461; U-bolt, Nut 45 µm - DIN EN ISO 1461
- Environmental conditions
- Outdoor, low to moderate pollution (C3 / C4 - low)
- Description
- Hot-dip galvanised (HDG) single beam clamp for connecting MIQ steel baseplates to steel beams
- Material composition
- Clamp: EN-GJMB-350-10 - DIN EN 1562, EN-GJMW-400-5 - DIN EN 1562, EN-GJMW-450-6 - DIN EN 1562; bolt: 8.8 grade steel; nut: 8 grade steel
- Surface finish
- HDG: Clamp 55 µm - DIN EN ISO 1461; U-bolt, Nut 45 µm - DIN EN ISO 1461
- Environmental conditions
- Outdoor, low to moderate pollution (C3 / C4 - low)
- Description
- Hot-dip galvanised (HDG) connector for fastening MQ strut channels parallel to MI girders
- Surface finish
- HDG: connector 55 µm - DIN EN ISO 1461; bolt 45 µm - DIN EN ISO 1461
- Environmental conditions
- Outdoor, low to moderate pollution (C3 / C4 - low)
- Description
- Hot-dip galvanised (HDG) connectors for flexible installation of horizontal divider beams in lift shafts
- Surface finish
- HDG: 55 µm - DIN EN ISO 1461
- Environmental conditions
- Outdoor, low to moderate pollution (C3 / C4 - low)
- Description
- Hot-dip galvanised (HDG) connector used to connect MI girders longitudinally for long spans in heavy-duty applications
- Surface finish
- HDG: connector 55 µm - DIN EN ISO 1461; bolt, nut 45 µm - DIN EN ISO 1461
- Environmental conditions
- Outdoor, low to moderate pollution (C3 / C4 - low)
- Tightening torque
- 84 Nm
- Description
- Hot-dip galvanised (HDG) multi-angle connector used with MIC-MAH connectors for fastening MI girders to one another at an angle
- Surface finish
- HDG: connector 55 µm - DIN EN ISO 1461; toothed plate, bolt, nut 45 µm - DIN EN ISO 1461
- Environmental conditions
- Outdoor, low to moderate pollution (C3 / C4 - low)
- Tightening torque
- 84 Nm
- Description
- Hot-dip galvanised (HDG) medium-duty connectors to connect two MIQ girders
- Material composition
- DD11 MOD - HN 547, S235JR - DIN EN 10025
- Surface finish
- Hot-dip galvanized 55 µmDIN EN ISO 1462
- Environmental conditions
- Outdoor, low to moderate pollution (C3 / C4 - low)
- Description
- hot-dip galvanised (HDG) heavy-duty connectors to connect two MIQ girders
- Material composition
- DD11 MOD - HN 547, S235JR - DIN EN 10025
- Surface finish
- Hot-dip galvanized 55 µmDIN EN ISO 1462
- Environmental conditions
- Outdoor, low to moderate pollution (C3 / C4 - low)
- Description
- Hot-dip galvanised (HDG) baseplate for fastening MIQ girders to concrete for heavy-duty applications
- Material composition
- DD11 MOD - HN 547, S235JR - DIN EN 10025
- Surface finish
- Hot-dip galvanized 55 µmDIN EN ISO 1462
- Environmental conditions
- Outdoor, low to moderate pollution (C3 / C4 - low)
- Description
- Hot-dip galvanised (HDG) screw with an integrated toothed plate for easier fastening and one-handed adjustment of MI and MIQ connectors
- Material composition
- Bolt: 8.8 grade steel; toothed plate: EN-GJMW-400-5 - DIN EN 1562, EN-GJMW-450-7 - DIN EN 1562
- Surface finish
- HDG: 45 µm - DIN EN ISO 1461
- Environmental conditions
- Outdoor, low to moderate pollution (C3 / C4 - low)
- Description
- Hot-dip galvanised (HDG) baseplate for fastening MIQ girders to steel for heavy-duty applications
- Material composition
- DD11 MOD - HN 547, S235JR - DIN EN 10025
- Surface finish
- Hot-dip galvanized 55 µmDIN EN ISO 1462
- Environmental conditions
- Outdoor, low to moderate pollution (C3 / C4 - low)
- Description
- Hot-dip galvanised (HDG) connector offering highest load capacity within the MI and MIQ modular system
- Material composition
- C30 - DIN EN 10250-2
- Surface finish
- HDG: 55 µm - DIN EN ISO 1461
- Environmental conditions
- Outdoor, low to moderate pollution (C3 / C4 - low)
- Description
- Hot-dip galvanised (HDG) connector used to connect MIQ girders longitudinally for long spans in heavy-duty applications
- Material composition
- DD11 MOD - HN 547, S275JR - DIN EN 10025
- Surface finish
- Hot-dip galvanized 55 µm DIN EN ISO 1462
- Environmental conditions
- Outdoor, low to moderate pollution (C3 / C4 - low)
- Description
- Galvanised decking hanger for fastening threaded rods to trapezoidal metal sheets
- Base material type
- Trapezoidal sheet, Concrete
- Material composition
- DD11 - DIN EN 10111
- Surface finish
- Indoor Coated - Electro galvanised
- Description
- Beam connectors for attaching MP-PS pipe shoes to steel beams
- Fire resistance (yes/no)
- No
- Temperature resistance
- -20 - 300 °C
- Material composition
- Beam Clamps (Clamping Claw + Saddle): Cast Iron per DIN EN1562, Baseplate: S280GD per EN10346, Rectangular washer: S235JR – Yield280 per HN 707, Bolts: F Class 8.8 per ISO 898-1, Nuts: Grade 8 per ISO 898-2, Retaining Washer: C60E per EN10132-3, Cylindrical washers: Stainless Steel X5CrNi18-10 per EN10088-3
- Description
- Beam connectors for attaching MP-PS pipe shoes to steel beams
- Fire resistance (yes/no)
- No
- Temperature resistance
- -20 - 300 °C
- Material composition
- Beam Clamps (Clamping Claw + Saddle): Cast Iron per DIN EN1562, Baseplate: S280GD per EN10346, Rectangular washer: S235JR – Yield280 per HN 707, Bolts: F Class 8.8 per ISO 898-1, Nuts: Grade 8 per ISO 898-2, Retaining Washer: C60E per EN10132-3
- Description
- Galvanized perforated bands used in various applications
- Base material type
- Concrete
- Material composition
- DX51D+Z275-N-A - DIN EN 10346
- Surface finish
- Indoor Coated - Electro galvanised
- Description
- Galvanised medium-duty base plate to fasten metric threaded rods with two anchor points
- Material composition
- DD11 - DIN EN 10111
- Surface finish
- Indoor Coated - Electro galvanised
- Environmental conditions
- Dry indoor conditions (C1) Indoor with temporary condensation (C2)
- Description
- Heavy-duty adjustable baseplate for connecting an MT girder horizontally between two parallel walls
- Material composition
- Q355 or better steel
- Surface finish
- Indoor Coated - Electro galvanised
- Material thickness
- Base 8 mm
- Description
- Galvanised beam clamp for fastening threaded rods to steel girders without internal thread
- Base material type
- Steel
- Material composition
- EN-GJMB – EN 1562
- Surface finish
- Indoor Coated - Electro galvanised
- Description
- Galvanised retaining strap for fastening MAB beam clamps more securely
- Base material type
- Steel
- Material composition
- Steel
- Surface finish
- Indoor Coated - Electro galvanised
- Description
- T-head bolt for fastening connectors and other construction elements to MIQ girders
- Material composition
- Bolt: grade 8.8 - DIN EN ISO 898, Plastic: PBT
- Surface finish
- Outdoor Coated - HDG
- Environmental conditions
- Outdoor, low to moderate pollution (C3 / C4 - low)
- Description
- MIQM Wing nut, connecting element for MIQ profiles
- Material composition
- Nut: C4C - DIN EN 10263, Plastic: PA 6.6
- Surface finish
- Outdoor Coated - HDG
- Environmental conditions
- Outdoor, low to moderate pollution (C3 / C4 - low)
- Description
- Premium hot-dip galvanised (HDG) baseplate for light-duty fixed point applications (metric)
- Material composition
- S235JR - DIN EN 10025
- Surface finish
- Outdoor Coated - HDG
- Environmental conditions
- Outdoor, low to moderate pollution (C3 / C4 - low)
- Description
- Galvanised light-duty base plate to fasten metric threaded rods with two anchor points
- Material composition
- DD11 - DIN EN 10111
- Surface finish
- Indoor Coated - Electro galvanised
- Environmental conditions
- Dry indoor conditions (C1) Indoor with temporary condensation (C2)
- Description
- Standard hot-dip galvanised (HDG) connector for fastening MI girders to one another
- Material composition
- Connector: DD11 MOD - HN 547, S235JR - DIN EN 10025; backing plate, toothed plate: EN-GJMW-400-5 - DIN EN 1562, EN-GJMW-450-7 - DIN EN 1562; bolt: 8.8 grade steel; nut: 8 grade steel
- Surface finish
- HDG: connector 55 µm - DIN EN ISO 1461; backing plate, toothed plate, bolt, nut 45 µm - DIN EN ISO 1461
- Environmental conditions
- Outdoor, low to moderate pollution (C3 / C4 - low)