Concrete saws
Find out how our hand-held cut-off saws, concrete cutters and slitting tools are designed for faster cutting in concrete, masonry, and metal
8 Products
- Description
- Compact top-handle battery cut-off saw, for cutting up to 120 mm with 300 mm blades in concrete, masonry and metal (Nuron battery platform)
- Base materials
- All types of concrete and brick, All types of masonry (hollow brick, sand-lime block, etc.), Asphalt, Steel, Mineral
- Dimensions (LxWxH)
- 660 x 290 x 350 mm
- Protection class
- IEC Battery operated
- Description
- Versatile rear-handle battery cut-off saw, for cutting up to 120 mm with 300 mm blades in concrete, masonry and metal (Nuron battery platform)
- Base materials
- All types of concrete and brick, All types of masonry (hollow brick, sand-lime block, etc.), Asphalt, Steel, Mineral
- Dimensions (LxWxH)
- 740 x 290 x 350 mm
- Protection class
- IEC Battery operated
- Description
- Compact top-handle petrol saw (63cc) with blade brake, for cutting up to 120 mm with 300 mm blades in concrete, masonry and metal
- Motor cylinder
- 63.3 cm³
- Rated power
- 3.2 kW
- Wet or dry operation
- Wet and dry
- Description
- Versatile rear-handle 70 cc petrol saw with auto-choke – cutting depth up to 125 mm
- Motor cylinder
- 68.7 cm³
- Rated power
- 3.5 kW
- Wet or dry operation
- Wet and dry
- Description
- Powerful, easy-start 87 cc petrol saw with auto-choke – max. blade diameter 400 mm for cutting depth up to 150 mm
- Motor cylinder
- 87 cm³
- Rated power
- 4.3 kW
- Wet or dry operation
- Wet and dry
- Description
- Wet and dry electric hand-held diamond cutter – cutting depth up to 120 mm with 305 mm blades
- Disc diameter
- 305 mm
- Cutting depth
- 120 mm
- No load RPM
- gear 1: 4900 rpm
- Description
- Dry electric hand-held diamond cutter – cutting depth up to 85 mm with 230 mm blade
- Disc diameter
- 230 mm
- Cutting depth
- 80 mm
- No load RPM
- gear 1: 6500 rpm
- Description
- Slitting machine for wall/floor chasing and cable, conduit or pipe installations in a variety of base materials
- Cutting depth
- 50 mm
- Max. cutting width
- 50 mm
- Disc diameter
- 150 mm
Discover battery cut-off saws
The performance of gas cut-off saws without all the hassle
What if you could forget about fumes, noise and fuel-mix issues? And what if flooded engines and broken pull cords were a thing of the past?
When you use our cut-off saws on the Nuron battery platform together with dedicated battery-optimized blades we've developed for speed and run time, you can get the same work done as with gas cut-off saws – but without the hassle and extra costs of gas.
Get more out of our battery cut-off saws
More cutting speed
Get the same power as 60cc gas cut-off saws so you slice faster through concrete, masonry or metal.
More cuts per charge
Maximise your run time – with 2x2 B22-255 batteries the DSH 700-22 can cut as much concrete as with a full tank of gas.
More jobsite safety
A faster blade brake stops the tool within four seconds – about half the time of gas cut-off saws.
More jobsite convenience
Run all your tools – including heavy-duty cut-off saws – on the same high-performing 22V Nuron battery platform.
More power – less weight
The performance of gas with more maneuverability with the DSH 600-22
Doing paving work, cutting curbstones or metal, or making new openings in concrete? The DSH 600-22 gives you the power you need for quicker cuts up to 120mm – all in a tool that's built light enough for comfortable handing in any direction.
For jobs where tool weight is key, use 2x2 B 22-170 Nuron batteries. Need more run time? Try 2x2 B 22-255 Nuron batteries and cut as much concrete as with a full tank of gas.
Want extra flexibility when working outdoors? Add our portable DWP 15-22 water supply system and you're good to go.
Hit the ground running
Gas-like performance for ground facing jobs with the DSH 700-22 cordless cut-off saw
For heavy-duty jobs like cutting concrete slabs, expansion joints, metal deck or curbstones, choose the DSH 700-22 battery cut-off saw.
The DSH 700-22 comes with a rear handle for extra comfort when you're doing floor-focused tasks. And when you pair the tool with our specially designed blades you'll get performance similar to a 70cc gas-cut off saw. Need more run time? Put 2x2 B22-255 Nuron batteries in the tool.
Blades built for your cut-off saw
Dedicated diamond blades and cutting discs optimized for battery tools
The SPX Universal A diamond blade has been specially developed by Hilti for optimal cutting speed and cuts per charge when you're cutting concrete and masonry. With a diameter of 300mm and a thinner blade core, it uses less power during cutting. That means you can work longer between recharges.
For the best possible performance when cutting metal, use our durable and powerful SPX metal cutting disc.
Safer cutting work
Protect your crews with a faster blade brake and lower tool vibration
- Extremely fast-acting blade brake: stops the disc spinning within four seconds
- Less dust: cut dust exposure to allowed limits with our DWP 15-22 battery water pump when you are working outdoors – or indoors where allowed. You can also cut dust exposure by up to 50% with our dedicated DSH-DRS dust removal system.
- Vibration lower than <2.5m/s2: Active Vibration Technology (AVR) comes as standard
- Elimination of fumes and lower noise levels
Cut concrete...and tool costs
Get lower running costs and a longer lifespan for your cut-off saw
No one likes to spend extra money. Here's how using our battery cut-off saws can help you save on tool costs:
- Elimination of costs associated with fuel, including purchase, storage and transport
- Lower maintenance costs as battery-cut off saws have fewer wearable parts
- Up to double the tool lifespan thanks to a brushless electric motor